- Possible working positions: horizontal, on the side or on the head vertically.
- Suitable for working in horizontal and vertical machining centres.
- All surfaces ground with a parallelism and perpendicularity of 0.02 mm.
- 0.01mm clamping repeatability.
- Monoblock design.
- Side windows.
- Fitted with a high pressure single action Pneumo-hydraulic intensifier.
- Entry air pressure regulates the clamping force.
- Clamping force is 2.5/4/5 tons according to size.
- Automatically opens and closes 4 mm.
Semi-sphere
The ARNOLD MAT has a descending clamp system to avoid that the clamped part lifts up. This is a semi-sphere installed between the moveable jaw and the spindle shoe. When the clamping force is carried out by the spindle, this pressure is divided in two directions, one of which pulls down on the work-piece.
Clamping possibilities
Set supplied
- base body
- pneumo-hydraulic spindle
- anti return valve
- 1 set of plain jaws
- 4 end clamps
- instruction manual
Additional elements needed
- Connection of the compressor to the vice.
- Filter unit, gauge and lubricator of the air inlet.
- Note: If using a control pedal: The set of valves supplied with the vice must be placed between the compressor and the pedal, not between the pedal and the vice.
