- All surfaces ground with a parallelism and perpendicularity of 0.02 mm.
- Possible working positions: supported on the base, on the side or vertically on the head.
- Suitable for working in horizontal and vertical machining centres.
- 0.01 mm clamping repeatability.
- Pneumo-hydraulic high pressure single acting intensifier.
- 4 ton clamping force and directly adjustable with the air pressure.
- Automatically closes and opens 4 mm.
- Side windows.
- The clamping field depends on the needs of the customer. The vice is supplied with soft jaws and the length will depend on the amount machined.
Compensated clamp
The exterior clamping pressure towards the centre provides a dynamically compensated clamp and avoids deformation.
Clamping possibilities
Set supplied
- base body
- pneumo-hydraulic spindle
- anti-return valve
- 1 set of soft jaws - 2 x side jaws - 1 central jaw II (block)
- 4 end clamps
- instruction manual
Additional elements needed
- Connection of the compressor to the vice.
- Filter unit, gauge and lubricator of the air inlet.
- Note: If using a control pedal: The set of valves supplied with the vice must be placed between the compressor and the pedal, not between the pedal and the vice.
