- Remove the screw (1041) at the back of the movable jaw (1042).
- Lift the jaw forwards and remove. Special care must be taken not to lose the semi-sphere (1043) inside.
- Remove the 4 screws that fix the mounting plate (2018) to the vice body and take it out.
- Remove the 2 allen set-screws (2004) on either side under the fixed jaw.
- The spindle can now be taken out together with the spindle shoe.
- The spindle is composed of two different parts; one side is the hydraulic pressure cylinder with the threaded spindle (2008) and the other side is the clutch assembly. To remove the spindle shoe (1048), the spindle needs to be disassembled in its parts. The unifying element is the allen set-screw (202), once it is loosened the 2 parts can be separated.
- The protecting spiral guide (1045) needs to be held securely for future assembly.
The spindle is now disassembled.
