Pneumo-hyrdaulic spindle for CLASSIC
This spindle has no clutch or a handle therefore bringing the work-piece to the vice is carried out by rotating the pneumo cylinder. This is an ideal spindle for large serial work-pieces, given that it only opens and closes 4 mm automatically. It only needs to have a 6 bar pressure compressed air supply; directly from the compressor. As it is a single-acting cylinder, it only has a single entry and exit port; greatly simplifying its installation on the machine. Automatic working with this system can be easily carried out, as it can be commanded using a signal from the machine, using a solenoid valve without an operator being present. In addition, it can also carry out work which is not in series; the spindle is completely ergonomic, as the handle does not need to be rotated. It can also be commanded with a pedal, leaving the operators hand free to place the work-piece in position. This spindle needs dry and lubricated air supplied by a compressor. Pneumo-hydraulic spindle.
Arnold pneumo-hyrdaulic spindle | 125 | 160 | 200 |
---|---|---|---|
Spindle dimensions | 800 600 125 | 800 600 160 | 800 600 200 |
Clamping force (kg) | 4.000 | 5.000 | 8.000 |
a | Trap. 30 x 6 | Trap. 30 x 6 | Trap. 36 x 6 |
b | ø24d9 | ø24d9 | ø30d9 |
c | ø54 | ø54 | ø68 |
d | ø88 | ø88 | ø88 |
e | 285 | 344 | 348 |
f | 448 | 567 | 654 |
g | 472 | 589 | 675 |
Weight (kg) | 5,5 | 6,5 | 8,1 |